INSTALLATION AND REPAIR OF CRYOGENIC PUMPS

Cryopumps offer several advantages compared to other high-vacuum pumps. For instance, their pumping speed for water vapour is up to 4x higher than any other vacuum pump with the same inlet diameter. Furthermore, unlike gas transfer pumps, i.e. turbomolecular pumps or oil diffusion pumps, cryopumps condense all the gasses within them.

At Zeagle, we install cryogenic pumps and carry out maintenance which includes but not limited to KP500, KP300, KP5050, Delta30SC, 32SC, Delta5050, Omega pumps etc. contact us today.

BOLTING AND BOLTING TENSIONING

Bolt tensioning and torquing are two different ways to adjust the tension on a bolt. Torque is the ability to apply a rotational force and is used to tighten and loosen bolts, while bolt tensioning is when the bolt’s nut is tightened against the head of the bolt. This tightening creates a drag on the bolt, increasing its stability and preventing it from loosening during use. Torque wrenches use generally depends on the size of the bolt, while tensioners can be used with almost any bolt size.

Bolt tensioning is the process of adjusting the tension on a nut or bolt by using a hydraulic press force. This is done to precisely adjust the strength of the connection between the parts being joined. The process can tighten or loosen connections, and it is an often-needed procedure in many industries. Hydraulic bolt tensioner is an essential part of modern machinery, as they allow for accurate and repeatable adjustment of bolt tension.

Due to our high skilled in maintenance projects, we have team of skilled technicians always ready to carry out your next bolting and bolting tensioning project.

FLANGE MANAGEMENT

Controlled flange management is a recognised technique for leak prevention in bolted flange assemblies.

Across several industries maintenance and pre-commissioning schedules are prioritising flange management from design to develop start-ups that are leak-free.

Zeagle facilitates the process of controlled tightening and its associated benefits, using a specially commissioned software package, written procedures, and bolt loading calculations, to ensure that joints are tightened in a safe manner.

Controlled bolting and flange management are recognised components of a system’s integrity program. They provide assurance of proper assembly and tightening of bolted joints during the construction process, or any intervention that follows it.

MAINTENANCE OF TURBINES

Material selection is a key factor in gas turbine performance and lifecycle cost because it has a central influence in the maintenance of the gas turbine. Further, the operation of a gas turbine does result in gas path degradation that impacts lifecycle costs and eventually design, manufacture, material choice and maintenance. A component repair programme that minimizes maintenance costs and maximizes equipment availability can be instituted to meet or improve lifecycle cost.

A turbine is a rotating part which converts the kinetic energy of a working fluid into useful mechanical energy and /or electrical energy.

There are set of blades mounted on a rotor which helps in extracting energy from the moving fluid. The efficiency of turbines depends on the design of the blades.

Contact us for any maintenance services for the following turbines.

• Water Turbines
• Gas Turbines
• Steam Turbines
• Wind Turbines

OVERHAULING OF COOLING COMPRESSORS AND CHILLER UNITS

Whether you are running a refrigeration system or commercial air conditioning, a compressor unit is essential to all cooling functions. The compressor is the key component that enables refrigerant gas to move through the system. If it fails, the entire cooling system comes to a stop – no matter the details.

Compressors are also essential to heating functions in a large commercial HVAC system. However, they are most often thought of in terms of cooling. Losing the ability to cool a building during the summer can prompt fast complaints. And when refrigeration fails, thousands of dollars in products are usually on the line.

We maintain and repair Delletto compressor, York compressor, Carrier compressor etc.